Dynatrol Level Switch
Automation Products, Inc., as manufacturer and supplier, offers the Dynatrol Level Switch for bulk Solids.
It is ideal for the Feed and Grain Industry-lending itself to high, intermediate or low point level detection in FEED BLENDING, GRAIN STORAGE or PELLET MILLS--on materials ranging from light fluff to heavy granulars or pellets.
The units are approved for Class I, Group D; Class II, Groups E, F & G; and Class III Services.
The basic principle of operation: when the probe is uncovered, it is free to vibrate and produces an output signal.
This signal operates a relay that indicates the probe is uncovered or that a low level exists.
When the probe is covered a dampening of the oscillations occurs, the output signal is no longer present and the relay indicates that a high level exists.
Installation is simple. The level detector is mounted through a 3/4" half-coupling at the point of desired level detection.
The vibrating probe tolerates considerable buildup and caking, resulting in extended capability of detection.
Built in the USA and supported by our Design, Manufacturing, Sales and Service teams, the Dynatrol detectors are constructed for long operating life. Requiring no adjustments and having no moving parts, they are virtually wear-free.
Many Dynatrol Level Switches have been in service for 25 and 30 years.
For more information, call 800-231-2062.
See Related Websites/Articles:
|
