To view this as a web page, click here

 

 
 
 
 
 

6/22/2020
Published Weekly by Grain Journal
Edited by Grainnet Editor Kendall Trump
GRAINNET · Unsubscribe

Published Every Monday by Grain Journal

 

Fall Protection: Harness Inspection

Over time, all fall protection harnesses deteriorate with use and exposure.

For this reason, all harnesses must be inspected prior to each use.

Inspect the following components:

Webbing: Grasp the webbing with your hands and bend the webbing. This makes damaged fibers and cuts easier to detect. Follow this procedure, checking both sides of each strap. Look for frayed edges, pulled stitches, cuts, burns, and chemical damage.

D-Rings/Back Pads: Check D-rings for distortion and cracks, breaks, and rough or sharp edges. The D-ring should pivot freely. D-ring pads should be free of damage and wear.

Attachment Buckles: Inspect for unusual wear, frayed or cut fibers, broken stitching on the buckle or D-ring attachments.

Tongue/Grommets: The tongue receives heavy wear from repeated buckling an unbuckling. Inspect for loose, distorted, or broken grommets. Loose grommets may signal that the harness has been subjected to fall arrest forces.

Tongue Buckles: Buckle tongues should be free of distortion. The outer bars and center bars must be straight. Ensure that the dual-lab release mechanism is free of debris and engages properly.

Fall Arrest Indicators: Harnesses are equipped with fall indicators that indicate if the harness has been subjected to the forces associated with a fall. To learn more about the fall indicators on your harness, be sure to read the user manual provided by the manufacturer. Fall arrest indicators vary by manufacturer.

Harnesses that do not pass inspection should be disposed of in a manner that prevents future use.


fall-harness-picture.jpg#asset:203992



Source: Dillon, Tom. (2014, October 2). How to Inspect and Maintain Personal Fall Arrest Systems. Retrieved from ishn.com

Source: Joe Mlynek is president of Progressive Safety Services LLC, Gates Mills, OH; joe.mlynek@progressivesafety.us; and content creation expert for Safety Made Simple, Inc., Olathe, KS; joe@safetymadesimple.com

This Safety Tip of The Week was originally published on April 3, 2017.

 
 

 

Follow Us on Twitter

Receive Our Safety Enews Twice a Month

 

This Safety Alert was published by Grain Journal, Decatur, IL

800-728-7511 | website: www.grainnet.com

Unsubscribe from this newsletter · Subscribe