To view this as a web page, click here

 

 
 
 
 
 

October 18, 2021
Safety Tip of the Week delivered to your inbox each Monday by GrainnetSafety.com

Skid-Steer Loader Safety - Crushing Injuries

Skid-steer loaders are useful tools in many industries; however, their use does not come without risk.

Skid-steer loaders have caused numerous injuries and fatalities across many types of industries.

One of the most common causes of skid-steer-related incidents involve workers being crushed by moving parts.

The following safety practices can eliminate crushing related injuries:

  • Familiarize yourself with the information contained within the operator’s manual as well as the equipment’s labels. These labels warn of the location of pinch points, hot components, crushing hazards, hot components and liquids under pressure.
  • Perform a pre-use inspection to include elements such as tires, cleanliness of the cab, the safety belt or bar, grab handles, steps, footholds, attachment connections, fluid hoses, etc.
  • Never enter or exit the loader under a raised attachment.
  • Never start the engine from outside of the cab.
  • Always fasten the safety belt and lower the safety bar when in the operator seat.
  • Never climb into the cab with the engine running, as this action may accidentally engage the controls.
  • Never lean out of the cab while the engine is running; keep your body within the cab at all times.
  • Never lift attachments over a person because loads may shift, fall, or drop suddenly, placing workers in danger.
  • Never work under a raised attachment unless the lift arms are secured in the “up” position. Refer to the operators’ manual for information on the equipment’s lift-arm-support devices.
  • Perform maintenance work with the engine off, key removed and secured, parking brake set, wheels blocked, and attachments lowered or properly supported.

skid-steer.jpg#asset:142678:transMaxWidth300px

This Safety Tip of the Week was originally published April 23, 2018.


Source: Joe Mlynek is president of Progressive Safety Services LLC, Port Clinton, OH: joe.mlynek@progressivesafety.us, and content creation expert for Safety Made Simple Inc., Olathe, KS; joe@safetymadesimple.com.

 
 

 

Follow Our Safety News on Twitter

Receive Our Safety E-News Twice a Month

Safety Tip of the Week Archives

 

Safety Tip of the Week is edited by Digital Media Specialist John Reidy and published each Monday by Grain Journal, Decatur, IL

800-728-7511 | Website: grainnetsafety.com